0014The sharpening method is based on the removal of a thin metal layer from a worn part of a tooth with the simultaneous formation of a tooth profile. The shape of the tooth is determined by the design of the control cam. Installation is completed with two cams for different tooth shapes. By adjusting the scenes of the cam, sharpening of saws with a straight rear edge, such as ‘Woodmizer ',‘ Lenox', etc is provided.

0053The device is intended for tooth setter and band saws with a width of 50 to 180 mm in wood. The device is operated manually and allows to perform both a classic wiring, and a special, providing a cleaner cut and increasing the number of re-saws without wiring. The principle of the device is to bend the saw tooth, clamped at the level of its base between the anvil and the clamp, using a steel punch. The screw and the clamp are actuated by a lever-hinge mechanism, providing a reliable, adjustable clamp with a wedge effect, while ensuring exceptional ease of movement. Fixing the position of the tooth, both right and left, in front of the punch is carried out by one changeover pawl.

005402The device is intended for tooth setting of frame and band saws with a width of 10 to 50 mm in wood. The device is operated manually and allows to perform both classic wiring and special, providing a cleaner cut and increasing to five the number of re-saws without wiring teeth. The device’s operation principle is to bend the saw tooth, clamped at the level of its warp between the anvil and the clamp, using a steel punch. The screw and the clamp are actuated by a lever-hinge mechanism, which ensures reliably adjustable clamping of the saw with a wedge effect, while ensuring exceptional ease of movement.

0055The device is designed for tooth setting of circular saws used in longitudinal and transverse sawing of logs and lumber. The operational principle of the device is the bending of the saw tooth, clamped between the anvil and the clamp, with the help of a punch made of hardened steel. The punch and clamp are driven by a lever-hinge mechanism, which provides a reliable, adjustable clamp with a wedge effect. Fixing the position of the saw tooth, both right and left, is carried out by a pair of built-in pawl, the turn of the saw is done manually. Changing the direction of the wiring to the opposite is done by moving the saw back side to the axis of the rocker after the saw is removed from the wiring mechanism and the mechanism is switched to another pawl.

0401The bench levelling with the rolling device is intended for work on the levelling and rolling of band saws up to 150 mm wide. The feed speed of the feed tape is continuously adjustable, the feed direction is reversed. The principle of operation consists in creating rolling scratches on the surface of the saw when the saw blade is rolled between the drive rollers of the mill. The pressure of the rollers exceeds the yield strength of the saw material and the central part of its blade becomes longer than the edges, which provides compensation for the thermal expansion of the cutting edge of the saw during the sawing process.

©2019 “IRM” AS. All Rights Reserved.

Search