0054 – Band saw teeth setting - manual tool

005402The device is intended for tooth setting of frame and band saws with a width of 10 to 50 mm in wood. The device is operated manually and allows to perform both classic wiring and special, providing a cleaner cut and increasing to five the number of re-saws without wiring teeth. The device’s operation principle is to bend the saw tooth, clamped at the level of its warp between the anvil and the clamp, using a steel punch. The screw and the clamp are actuated by a lever-hinge mechanism, which ensures reliably adjustable clamping of the saw with a wedge effect, while ensuring exceptional ease of movement.

Fixing the position of the tooth, both right and left, opposite the punch is controlled by changeover pawl. The device is equipped with an indicator to control the amount of wiring, as well as a rearranged anvil with two levels in height relative to the punch.
Permissible saw thickness: ≤ 2.5 mm
Height of the tooth: 2.5 - 12 mm
Adjustment accuracy: ± 0.01 mm
Time of one saw treatment (4.25 m): ≤15 min
Preparation time: ≤ 2 min
Overall dimensions: 340x135x 300 mm
Weight: 4 kg

©2021 “IRM” AS. All Rights Reserved.